Chapter 7 Options
153
1
Affix the provided mark stickers at the locations of the two recesses on the front for inserting
the sheet tables.
• Affix the mark stickers at the third and fifth recesses from the right.
2
Affix the provided mark stickers at the locations of the two recesses on the rear for inserting
the sheet tables.
• Affix the mark stickers at the third and fifth recesses from the left when viewing from the rear.
3
Attach the two sheet tables to the recesses at the front.
• Insert the lugs on the sheet tables into the recesses on which the mark stickers are affixed.
4
Attach the two sheet tables to the recesses at the rear.
• Insert the lugs on the sheet tables into the recesses on which the mark stickers are affixed.
Loading a Sheet on the Cutting Sheet
1
Remove the cutting sheet sandwiched between the reinforcing card from its bag.
• Retain the reinforcing card and bag, as these will be used when storing the cutting sheet.
2
Peel off the separator (adhesive surface protector) from the cutting sheet.
7
To Next Page
Loading...
