CG-60AR [Option]
- 1 -
© 2021 MIMAKI ENGINEERING CO.,LTD.
Installation instructions for the legs
This manual explains how to assemble the legs with the main unit. Be sure to read this manual before assembling.
Accessories
If there is a shortage of parts or a problem, please contact your local distributor or MIMAKI sales office.
How to tighten the screws
1
Use hex wrench to temporarily tighten the
screws (just tighten lightly).
2 Push the hex wrench into the tightening pipe
and retighten the screw.
Be sure to assemble with two or more people.
Leg x1 Caster holder x2 Leg stay x1 Base plate L x1 Base plate R x1
Roll bar x2
(With 2 collar×1)
(With 4 collar×1)
Hexagonal wrench
(4mm)x 1
Tightening pipe x 1 Screws (M5x16) x4 Screws (M5x15) x 14
To Next Page
Need help?
General
