Chapter 2 Cutting
67
Using the Creasing Tool
Be sure to use the optional sheet table and cutting sheet when creasing. "Sheet Tables and Cutting
Sheet"(P. 152)
Installing the Creasing Tool
1
Turn the knob screw and loosen the holder presser.
2
Insert the creasing tool into the tool holder.
(1) Push the brim of the creasing tool flush with the tool holder.
(2) Clamp the brim of the creasing tool.
Holder presser
Brim
Ensure no gap
remains
3
Secure the creasing tool in place.
• Turn the knob screw and fix the holder presser.
• Failure to secure firmly may result in lower quality.
2
To Next Page
Loading...
