Other Useful Functions
1
1
3
Useful Function
5
6
3-61
Set the network
You can also perform network setting with “Network Configurator”, the tool to perform network setting of
Mimaki’s product. To download the Network Configurator, check " Driver / Utility" on the download page at
Mimaki Engineering (http://eng.mimaki.co.jp/download/).
1
Press the key in the local mode.
2
Press the jog key or to select [SET UP] .
3
Press the key.
4
Press the jog key or to select [NETWORK].
5
Press the key.
6
Press the key.
• The IP address currently used by this machine is displayed.
7
Press the key.
8
Press the jog key or to select [MAC
Address] .
9
Press the key.
• The MAC address currently used by this machine is displayed.
• When you press , the remaining address is displayed.
10
Press the key.
• After connecting with the network, it takes time until the IP address is determined.
If the IP address has not been determined, “0.0.0.0” is displayed.
To Next Page
Loading...
