MIMAKI CG-130SRIII - Expand the Cutting (Plotting) Area; Set the EXPANDS Function to on

3-35
1
1
3
Useful Function
5
6
Expand the cutting (plotting) area
You can reduce the dead space to expand cut (picture drawing) area (EXPANDS function).
The dead space becomes less by 10mm for the front and right/ left.
Set the EXPANDS function to ON.
1
Press the key in the local mode.
2
Press the jog key or key to select [SET
UP].
3
Press the key.
4
Press the jog key or key to select
[EXPANDS].
5
Press the key.
6
the jog keyPress or key to select “ON.”
Pinch roller (left)
Pinch roller (right)
EXPANDS: OFF
EXPANDS: ON
When the sheet is set in the rear
FUNCTION
ENTER/HOLD
ENTER/HOLD