Connecting the cables
1-10
Connecting the power cable
After connecting the interface cable, you must connect the power cable.
Connect the power cable with the plug outlet of the following power specifications.
• Voltage : AC100 - 240V ± 10%
• Frequency : 50/60Hz
• Be sure to
connect the
ground wire.
• Using without the
ground wire causes
the damage of this
device and electric
shock that may be
very dangerous.
• Regarding the use
of two polar plug
outlet, you must
connect the
auxiliary ground
adapter to the
plug of power
cable.
• Earth the green wire (ground wire) of the ground
adapter. If you cannot, consult with an
electrician.
To Next Page
Loading...
