3-50
Output the Setting List
You can keep this plotted sheet for your future reference or transmit this document by facsimile when you
contact your local distributor for maintenance.
1
Set a A4-size discard sheet in a longitudinal direction ( P.2-16) ,
and replace the tool with “pen” ( P.2-6) .
2
Press the key in the local mode.
3
Press the jog key or to select [LIST] .
4
Press the key.
• Output the setting list.
• When you press the key, outputting of the list stops.
You cannot start at the position where you stop. You have to start outputting from the top
of the list.
• You cannot check the contents of this list directly on the computer.
• If A4 paper is set, set so that edges of the pinch roller and the paper are aligned.
• LIST function cannot be executed if the rotation function is specified. In such cases, "ERROR 901
OPERATION" is displayed.
• Turn the rotation function off before executing LIST.
FUNCTION
To Next Page
Loading...
