MIMAKI TS300P-1800 - Heater and Drying Settings; Capping Station Maintenance

- 6 -
(4) The [Edit Printer Settings] dialog is displayed.
(5) Set [Status Monitor] to "Mimaki".
(6) Click [Add] button.
(7) The [Add Port] dialog is displayed.
Select an appropriate port type according to the interface to be used.
(8) Click [OK].
The [New Printer] dialog is displayed. Enter an appropriate name indicating the connected
printer, and click [OK].
(9) Close the [Print settings] screen.
(10)Close the [Print environments] screen.
Select
Click