- 7 -
Perform printing
Here, the printing method using a sample image included in the CD of the TS300P-1800 Operation Manual.
1.
Start TxLink3.
2.
Set the CD of TS300P-1800 Operation
Manual into the disk drive.
3.
Click [Print Guide / Sample data].
• The “Print Guide and Sample Data” dialog is dis-
played.
4.
Specify the data you wish to print by using TxLink3.
(1) Select [Import image] from the [File] menu.
(2) The [Import] dialog is displayed. Select an image in the folder described in step 3, and click
[Open].
5.
Select the loaded image.
6.
Select the following items from [Properties] in the main window, and
check and/or change the various settings.
• Scale: Enlarges or reduces the image
• Rotate Mirror: Rotates and/or reverses the image
• Check P. 2 to P. 4 “First, confirm the following items:” without fail before creating a seal/a
sticker.
To Next Page
Loading...
