20
11. Press ENTER. The display will appear as follows, with a blinking cursor on the right
side of the display.
Use the V and W keys to change the direction.
12. Once the desired value is selected, press ENTER to store the value and return the display
to the item menu.
13. Press the V and W keys to scroll through the next menu items, which are the drive
parameters. The procedure for changing the parameter settings is the same as that for
changing the default keypad speed and the rotation direction. Refer to the AC100 or
AC200 Series Installation and Operation Manual for a complete list and description of the
parameters.
To Next Page
Loading...
