What to do if the Minarik Controller shows 'TRANSFER FAILED'?
If the Minarik Controller displays 'TRANSFER FAILED', it could indicate an issue with either the EPM Programmer or the target EPM. Inspect both the EPM Programmer and the target EPM to identify any potential problems.
How to fix 'SERIAL TIMEOUT!' on a Minarik AC200 Controller?
If the Minarik Controller displays 'SERIAL TIMEOUT!', check the connection to the computer.
What to do if my Minarik AC200 says 'NOT ENOUGH SPACE'?
If the Minarik Controller displays 'NOT ENOUGH SPACE', you need to free up memory to store another data file.
What to do if Minarik Controller displays 'NO COMPUTER FILE'?
If the Minarik Controller displays 'NO COMPUTER FILE', download a file from the computer.
What does 'PROGRAMR OFFLINE' mean on my Minarik AC200 and how do I fix it?
If the Minarik Controller displays 'PROGRAMR OFFLINE', establish communications with the computer.
What to do if Minarik AC200 Controller displays 'NO VALID FILES'?
If the Minarik Controller displays 'NO VALID FILES', establish communications with the computer.
Why does my Minarik AC200 Controller say 'MASTER SHORTED!'?
If the Minarik Controller displays 'MASTER SHORTED!', it indicates that the EPM in the MASTER AND CONFIGURATION PORT is damaged or installed incorrectly. Check the EPM installation.
How to fix 'READ ONLY FILE!' error on Minarik AC200?
If the Minarik Controller displays 'READ ONLY FILE!', modify the DEFAULTS data file settings.
What to do if Minarik AC200 Controller displays 'MASTER MISSING!'?
If the Minarik Controller displays 'MASTER MISSING!', install a Master or Configuration EPM.
How to fix 'LOW BATT VOLTAGE' on Minarik AC200?
If the Minarik Controller displays 'LOW BATT VOLTAGE', change the batteries.
Manual covers Minarik EPM Programmer for AC100/AC200 drives and TechLink software.
Minarik reserves right to modify products without notice; no liability for losses.
EPM Programmer warranty against defects for 12 months; repair or replacement terms.
Inspect cartons for shipping damage, unpack carefully, and check for damage or shortages.
Minarik assists with product application and customization options.
Instructions and display examples for powering the EPM Programmer on and off.
Lists and describes the functions available in the EPM Programmer's main menu.
Copies data from a MASTER EPM to a target EPM.
Copies a data file downloaded from a computer to a target EPM.
Copies a data file stored in the EPM Programmer to a target EPM.
Edits a data file stored in the EPM Programmer.
Creates a new data file to be stored in the EPM Programmer.
Erases a data file that is stored in the EPM Programmer.
Configures the EPM Programmer to allow editing of data files with different parameter versions.
Changes the contrast of the LCD display to optimize viewing angle.
Displays Software Version, Configuration Version, Number of stored Data Files, Battery Voltage, and Password.
Table detailing warning messages and their descriptions.
General| Brand | Minarik |
|---|---|
| Model | AC200 SERIES |
| Category | Controller |
| Language | English |
To Next Page
