Minarik AC200 SERIES User Manual

29
5.2.9 MISC INFORMATION
This function displays miscellaneous information related to the EPM Programmer. The
software version, configuration version, number of data files stored, battery voltage, and
password can be displayed.
Follow the procedure below to access the miscellaneous information:
1. Use the MENU key to scroll to MISC INFORMATION.
2. Press ENTER. The first item displayed is the internal software version of the EPM
Programmer. The software version cannot be changed without installing a new main
circuit board in the EPM Programmer.
A blinking cursor appears on the left side of the display.
3. Use the V and W keys to scroll through the items. Using the V key, the next item is the
configuration version. This can be changed using the LOAD CNFG EEPROM function
(refer to Section 5.2.7). This version number must match the parameter version number
of a data file in order to edit the data file.
4. Using the V key, the next item is the number of data files stored in the EPM Programmer.
The EPM Programmer can store up to thirty data files depending on the configuration
version (some configuration versions may require more memory, resulting in less
available memory for storing data files).

Minarik AC200 SERIES Specifications

General

Brand	Minarik
Model	AC200 SERIES
Category	Controller
Language	English