Minarik AC100 SERIES - Using the EPM Programmer; Powering EPM Programmer On and Off

6
5.0 USING THE EPM PROGRAMMER
5.1 TURNING THE EPM PROGRAMMER ON AND OFF
This display indicates what parameter
version the EPM Programmer is
configured for. The example version
is “309”.
This display indicates the parameter
version of the MASTER EPM (if
installed). The example version is
“309”.
This display indicates the filename of
the MASTER EPM (if installed). The
example name is “MINARK1_”.
This display shows the last Main
Menu item that was selected. The
example display is MASTER TO
EPM.