Using This Manual
1-8
z It is important for the hospital or organization that employs this equipment
to carry out a reasonable service/maintenance plan. Neglect of this may
result in machine breakdown or injury of human health.
z Never use combustible gas (e.g. anesthetic) or combustible liquid (e.g.
ethanol) around the analyzer. Otherwise, the risk of explosion may exist.
z Contacting exposed electronic components while the equipment is attached
to power can cause personal injury from electric shock or damage to
electronic components. Power down before removing covers to access
electronic components.
z Connect the analyzer to a socket having sole fuse and protective switch. Do
not use the same fuse and protective switch with other equipment (e.g. life
supporting equipment). Otherwise, the equipment failure, over current or
impulse current that occurs at the startup moment may lead to tripping.
z To prevent personal injury during the maintenance, keep your clothes, hairs
and hands from the moving parts, such as sample probe, clipper and
piercer.
z Possible mechanical movement of the warned position may lead to personal
injury during the normal operation, removal and maintenance.
z Be sure to dispose of reagents, waste, samples, consumables, etc.
according to government regulations.
z The reagents are irritating to eyes, skin and diaphragm. Wear proper
personal protective equipment (e.g. gloves, lab coat, etc.) and follow safe
laboratory procedures when handling them in the laboratory.
z If the reagents accidentally spill on your skin, wash them off with plenty of
water and if necessary, go see a doctor; if the reagents accidentally spill into
your eyes, wash them off with plenty of water and immediately go see a
doctor.
To Next Page
Loading...
