Need help?Do you have a question about the Mindray iMEC 8 and is the answer not in the manual?
General| Resolution | 800 x 600 pixels |
|---|---|
| Measurement Parameters | ECG, SpO2, NIBP, Temperature, Respiration |
| Respiration | Impedance method |
| Battery | Rechargeable lithium-ion battery |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Display | 8.4-inch TFT LCD |
| Battery Life | Up to 4 hours |
| Connectivity | optional Wi-Fi |
| ECG | 3-lead or 5-lead |
| SpO2 | Masimo |
| NIBP | Oscillometric |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20 to 60°C |
| Humidity Range | 15 to 95% (non-condensing) |
Details the components of the patient monitor's front panel, including buttons, screen, and indicators.
Illustrates the side views of the iMEC 12/iMEC 10 and iMEC 8 models, highlighting key components.
Shows the rear views of the iMEC 12/iMEC 10 and iMEC 8 models with labeled ports and connectors.
Explains the various areas of the patient monitor's display screen and their functions.
Guides users on how to interact with the monitor's touchscreen for navigation and operations.
Details how to customize the display layout, including parameter and waveform placement.
Explains how to navigate and use the monitor's main menu for operations and settings.
Covers initial power-on, monitoring setup, and safe disconnection procedures.
Covers monitor setup, language, brightness, help display, and date/time configuration.
Details how to adjust alarm, key, and QRS tone volumes.
Guides on setting, saving, editing, deleting, transferring, and loading monitor configurations.
Explains how to start, stop, and manage recordings from the thermal recorder.
Explains the on-screen symbols indicating battery charge level and status.
Provides important notes and safety precautions for handling and using the monitor's battery.
To Next Page
