Need help?Do you have a question about the Mindray iMEC 12 and is the answer not in the manual?
General| Measurement Parameters | ECG, SpO2, NIBP, Respiration, Temperature |
|---|---|
| Display | 12.1 inch TFT LCD |
| Resolution | 800 x 600 pixels |
| ECG | 3/5 lead ECG |
| SpO2 | Masimo SpO2 technology |
| NIBP | Adult, pediatric, neonatal modes |
| Respiration | Impedance method |
| Temperature | Dual-channel |
| Battery | Rechargeable lithium-ion battery |
| Connectivity | Wi-Fi |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -20 to 60°C |
| Humidity Range | 10% to 95% (non-condensing) |
| Power Supply | 100 to 240 VAC, 50/60 Hz |
Details components of the patient monitor's front panel, including buttons, screen, and indicators.
Identifies recorder, battery compartment, and connectors on the side views of iMEC 12/10 and iMEC 8 models.
Details rear panel connectors for iMEC 12/10 and iMEC 8 models, including grounding, power, USB, VGA, and network.
Explains the patient monitor's display screen areas and guides on using the touchscreen interface.
Details how to customize the screen layout, allocate parameters, and view waveforms for optimal display.
Explains how to access and navigate the patient monitor's main menu for operations and settings.
Provides steps for powering on, starting monitoring, and safely disconnecting the patient monitor from power.
Covers core monitor settings like name, language, brightness, date, and time for system configuration.
Explains how to adjust alarm, key, and QRS volumes and manage monitor configurations (save, load, edit).
Provides instructions on how to manually start and stop recordings and details automatic recording triggers.
Explains battery charging, status indicators, and important safety notes for handling and usage.
To Next Page
