DICOM 10-5
DICOM storage setting items are described as follows:
After you set the server (s) in DICOM Server Setting, the name
(s) will appear in the drop-down list, select the name of the
storage server.
Default is xxx-Storage, and it can be modified.
Application Entity title, Here, it should be consistent with that of
the storage server.
DICOM communication port, 104 by default. Here, the port should
be consistent with that of the storage server port.
Maximum Retries: Range: 0-9.
Interval Time(s): Reserved feature.
Timeout: Refers to time after which the system will stop trying
to establish a connection to the service. Value: 5－60s, in
increments of 5s, and 15 by default.
Select the compression mode: uncompressed, RLE, JPEG and
JPEG2000.
Select the compression ratio: lossless, low, medium and high.
If SCP supports this function, then select it.
To enable or disenable structured reporting sending.
Add the DICOM service to the service list.
Click to cancel the parameter setting.
To Next Page
Loading...
Need help?
General
