What to do if my Mindray Medical Equipment monitor displays characters but no images?
If the monitor displays characters but no images on your Mindray Medical Equipment, first, adjust the transmission power, gain, or TGC control. Then, make sure the probe is properly connected. Finally, unfreeze the image if the system is in a frozen state.
How to fix degraded image quality on Mindray Medical Equipment?
If the image quality has degraded on your Mindray Medical Equipment, first, select the appropriate exam type. If that doesn't work, adjust the image post-processing settings or reset them to default values. As a last resort, reset the system to the factory default settings.
Why won't the power indicator light on my Mindray Z50?
If the power indicator does not light on after turning on your Mindray Medical Equipment, it could be due to an abnormal power system or incorrect connection of the power cord. Verify that the plug has not become loosened or dislodged from the back of the system.
What to do if the Mindray Z50 monitor is on but the image is blank?
If the monitor is on but the image is blank on your Mindray Medical Equipment, the interval between turnoff and restart may be too short. Turn off the system and wait at least one minute before restarting. Alternatively, the monitor brightness or contrast may be improperly set, so adjust the contrast.
General| Battery Backup | Yes |
|---|---|
| Power Supply | 100-240V AC, 50/60Hz |
| Display Size | 15 inches |
| Display Type | LCD |
| Imaging Modes | Color Doppler |
| Connectivity | DICOM, USB, Ethernet |
| Applications | Obstetrics, Gynecology, Cardiac, Vascular, Urology, Musculoskeletal |
| Storage | 500GB HDD |
| Operating System | Windows-based |
Details the system's classification regarding electrical shock and water ingress.
Explains the meaning of DANGER, WARNING, CAUTION, NOTE, and Tips.
Defines the safety symbols used throughout the manual.
Provides essential safety guidelines for system operation.
Describes the voltage, frequency, and fuse requirements for the system.
Explains the functions of the system's control panel buttons and knobs.
Provides instructions on safely moving and positioning the ultrasound system.
Details how to connect external power and use the internal battery.
Explains the steps for connecting the system to an external power source.
Describes how the system operates when powered by its internal battery.
Provides procedures for turning the system on and off.
Details the steps and checks required before powering on the system.
Explains the correct procedures for shutting down the system.
Provides instructions on how to safely connect and disconnect probes.
Provides an overview of the system's main screen layout and basic operations.
Explains how to navigate and interact with the system's screens.
Guides the user through initiating a new patient exam.
Describes how to enter and manage patient demographic data.
Details the process of entering new patient information.
Guides the selection of the appropriate exam mode and probe.
Details the procedure for selecting exam modes and probes.
Details how to pause and properly end a patient examination.
Details how to optimize image quality in B Mode.
Details how to optimize image quality in M Mode.
Details how to optimize image quality in Color Mode.
Details how to optimize image quality in Power Mode.
Details how to optimize image quality in PW Mode.
Details how to optimize image quality in TDI modes.
Details how to freeze and unfreeze the displayed image.
Explains how to review recorded cine images.
Covers fundamental operations for performing measurements.
Explains standard measurements applicable across modes.
Details general measurements performed in 2D mode.
Details general measurements performed in M mode.
Details general measurements performed in Doppler modes.
Describes specialized measurements for different clinical applications.
Covers management of patient demographic and exam data.
Details the process of entering patient information.
Describes how to manage image files within the system.
Provides instructions on saving single-frame and cine images.
Covers procedures for reviewing and analyzing stored images.
Details how to access and navigate the image review screen.
Guides on performing analysis functions on stored images.
Details the iStation interface for managing patient data.
Explains how to search for patient records within iStation.
Describes how to view and manage patient data records.
Details network configuration settings for DICOM connectivity.
Explains how to configure DICOM services and server properties.
Describes the management of various DICOM services.
Details the configuration for DICOM image storage.
Guides on sending images to a DICOM storage server.
Guides on sending images to a DICOM print server.
Allows configuration of system parameters and user workflow.
Allows configuring default settings for specific exams.
Provides access to system maintenance options.
Provides details on the system's supported probes.
Explains the components and functions of the transducer.
Provides instructions for cleaning and disinfecting probes.
Offers guidance and warnings for performing biopsy procedures.
Outlines the fundamental steps for guiding biopsy procedures.
Describes the needle-guided brackets used for biopsy.
Details how to inspect and install needle-guided brackets.
Provides steps to verify the biopsy guide line for accuracy.
Details the procedure for removing needle-guided brackets.
Provides instructions for cleaning and sterilizing needle-guided brackets.
Details important safety precautions for battery handling.
Guides on the correct procedure for installing and removing batteries.
Explains the ALARA principle for minimizing ultrasound exposure.
Explains Mechanical Index (MI) and Thermal Index (TI).
Provides fundamental information about MI and TI.
Details how to adjust and control the system's acoustic power.
Explains controls that affect ultrasound output.
Details the system's acoustic output parameters.
Covers routine maintenance tasks performed by the user.
Provides instructions for cleaning the system components.
Provides solutions for common system malfunctions.
Details the inspection criteria for the power cord plug.
To Next Page
