Mindray Z50 User Manual

12-6 Probes and Biopsy
 Procedures for operating (with no biopsy function)
Inspection before examination
Connection to the ultrasonic
diagnostic system
Examinations
Wiping off the ultrasound gel
Washing the
transducer with water
Draining/drying
Immersion into disinfectant
Removing the transducer
from disinfectant
Rinsing the transducer into sterile water
Draining/drying
Inspection after use
Storage
Disinfection
Disconnection to the ultrasonic
diagnostic system
WARNING:
Disinfect the probe and sterilize the needle-guided bracket
before and after an ultrasound-guided biopsy procedure is
performed. Failure to do so may cause the probe and the
needle-guided bracket become source of infection.

Mindray Z50 Specifications

General

Battery Backup	Yes
Power Supply	100-240V AC, 50/60Hz
Display Size	15 inches
Display Type	LCD
Imaging Modes	Color Doppler
Connectivity	DICOM, USB, Ethernet
Applications	Obstetrics, Gynecology, Cardiac, Vascular, Urology, Musculoskeletal
Storage	500GB HDD
Operating System	Windows-based