Mindray Z50 User Manual

15-2 EMC Guidance and Manufacturer's Declaration
If the system is operated within the electromagnetic environment listed in Table 2 and Table 3,
the system will remain safe and will provide the following basic performances:
 Imaging;
 Doppler acoustic spectral displaying;
 Taking measurements;
 Patient information;
 Date/time information.
TABLE 1
GUIDANCE AND MINDRAY DECLARATION—ELECTROMAGNETIC EMISSIONS
The system is intended for use in the electromagnetic environment specified below. The
customer or the user of system should assure that it is used in such an environment.
EMISSIONS TEST
COMPLIANCE
ELECTROMAGNETIC ENVIROMENT－
GUIDANCE
RF emissions
CISPR 11
Group 1
The system uses RF energy only for its
internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B
The system is suitable for use in all
establishments including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes
Harmonic Emissions
IEC 61000-3-2
Class A
Voltage Fluctuations/ Flicker
Emissions
IEC 61000-3-3
Compliance

Mindray Z50 Specifications

General

Battery Backup	Yes
Power Supply	100-240V AC, 50/60Hz
Display Size	15 inches
Display Type	LCD
Imaging Modes	Color Doppler
Connectivity	DICOM, USB, Ethernet
Applications	Obstetrics, Gynecology, Cardiac, Vascular, Urology, Musculoskeletal
Storage	500GB HDD
Operating System	Windows-based