EasyManua.ls Logo

Minebea Intec Combics 2 Series - Page 221

Default Icon
224 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix: General Password
After selecting the “Setup” menu item a request to enter the access password
BEN.Codewill be displayed for 2 seconds.
y The first digit in the display flashes.
Combics 2 Numbers and the point can be entered via the number pad.
Combics 1 and 2 Select characters using the k and p keys
k key displays: Numbers in ascending order (0 to 9)
the characters . and -
then letters in descending order (from Z to A)
p key displays: Letters in alphabetical order a to Z
then the characters - and .
then numbers in descending order 9 to 0
k or p key multiple times t Press the k or p keys until the desired character is displayed.
) t Confirm the displayed character using the ) key.
y The second digit in the display flashes.
t Enter all additional characters in the same way.
y If the password is longer than 7 characters the first character will be displaced to
the left and out of the display.
)
t Confirm the entered password using the ) key.
(
t Exit the menu level using the ( key.
) hold
t Press and hold the ) key until you switch to the Operating mode.
Service password:
202122
General password:
40414243

Table of Contents

Related product manuals