Minebea Intec S-Type Load Cell LC Tigo PR 76 - Specifications; Equipment Supplied with the Load Cell; General Information

4 Specifications
4.1 Equipment supplied with the load cell
No. Description
1 Load cell
2 Quick guide
3 Calibration Certificate
4.2 General information
Material (Sensor) Load graduations ≤500 kg:
Stainless steel 1.4021 acc. to DIN EN 10088-3 (corresponds to AISI 420)
Load graduations ≥1 t:
Stainless steel 1.4542 acc. to DIN EN 10088-3 (corresponds to AISI 630)
Protection against environmen-
tal influences
Hermetically sealed by welding.
Protection classes in compliance with IEC 529 or DIN EN 60529
IP 66/IP67:
Dust-proof and leak-tight against strong jet water, with harmful effects when
immersed, (1 m water depth, 30 minutes).
Cable diameter 5 mm
Cable length 5 m
Cable gauge
6×0.14 mm
2
Cable bend radius ≥25 mm (fixed installation)
≥75 mm (flexible installation)
Cable sheath material Thermoplastic elastomer (TPE)
Cable sheath color Green
S-Type Load Cell LC Tigo PR 76 4 Specifications
EN-8 Minebea Intec