Minebea Intec S-Type Load Cell LC Tigo PR 76 - Possible Marking of the Load Cell for the Ex Area; Dimensions

4.3 Possible marking of the load cell for the Ex area
Zone Marking Certificate no. for
2 II 3G Ex nA IIC T6 Gc MIN21ATEX001X all PR 76 without /..E
22 II 3D Ex tc IIIC T85 °C Dc MIN21ATEX001X all PR 76 without /..E
NOTICE
Installation in the Ex area
For installations in the Ex area, it is imperative to observe the Ex safety instructions in the installation
manuals.
4.4 Dimensions
all dimensions in mm
Model A [mm] B [mm] C [mm] D [mm]
PR 76/60…500 kg 75 80 M12 15
PR 76/1 t 75 80 M20×1.5 15
PR 76/2 t 90 95 M20×1.5 15
PR 76/3 t, ../5 t 120 125 M20×1.5 20
4 Specifications S-Type Load Cell LC Tigo PR 76
Minebea Intec EN-9