Minebea Intec S-Type Load Cell LC Tigo PR 76 - Mounting Hole; Maximum Screw Installation Depth in the Threaded Hole and Tightening Torques; Tightening the Lock Nuts

5.3 Mounting hole
5.3.1 Maximum screw installation depth in the threaded hole and tightening torques
Max. capacity Max. screw installation
depth
Tightening torque
60…500 kg 15 mm 60 Nm
1 t 15 mm 320 Nm
2 t 15 mm 320 Nm
3 t, 5 t 20 mm 320 Nm
5.3.2 Tightening the lock nuts
NOTICE
Wrong placement of the screw wrench will destroy the weigh cell.
Never put the weigh cell in a vice.
Only place the screw wrench as depicted below.
5 Installation S-Type Load Cell LC Tigo PR 76
Minebea Intec EN-15