Minebea CSD-903-EX - Page 102

86
(2) When S1 selects [Set value or less] and S2 selects [Set value or more] with the Function F−22.
S1 output ON at S1 set value ≧ comparison value
S2 output ON at S2 set value ≦ comparison value
S0 output ON at S1 set value ＜ comparison value ＜ S2 set value
Above figure shows the case of S1 set value ＜ S2 set value.
In case of S1 set value ≧ S2 set value, S0 output will always be OFF.
(3) When the S1 selects [Set value or less] and the S2 selects [Set value or more] with Function F−22.
S1 output ON at S1 set value ≧ Comparison value
S2 output ON at S2 set value ≦ Comparison value
S0 output ON at S1 set value ＜ Comparison value ＜ S2 set value
comparison value (small) comparison value (large)
S1 set value S2 set value
S2 output ON
S2 output OFF
S1 output ON
S1 output OFF
S0 output ON
S0 output OFF
comparison value (small) comparison value (large)
S1 set value S2 set value
S2 output ON
S2 output OFF
S1 output ON
S1 output OFF
S0 output ON
S0 output OFF