X
Data Manual NO. Revision reason(content)
2015/07 DRW. NO. EN294-1492-F
Due to ECN NO.FN15-02117
< Correction >
Cover : Change [MINEBEA] logo
Foreword, Ⅶ. Change the setting amount for operating
condition of Preset tare weight cancellation
7-2., 8-10., 16-3-12. Change the combination including
[Brand].
8-11. Change the display range of accumulating
operation.
8-11-2. Correct the note of accumulating operation.
25.Setting table for functions
<Additional>
Foreword, Ⅶ. Add the setting value of net weight sign
inversion.
3-1. Add the accumulation display mode.
5-2., 6-6.Add the net weight sign inversion and
explanation.
7-2. Add the preset tare weight cancellation operating
condition, comparator brand setting target, operating
mode of RS-232C interface, brand switch target, brand
number, and external control input.
8-7-3. Add the explanation of net weight offset operation.
8-11. Add the explanation of accumulation value clear
and accumulation time clear.
8-12. Add the explanation of brand switch target.
8-14. Add all brand accumulation clear, brand-1, brand-2,
and brand-4.
9-2. Add the explanation of brand number setting
method.
9-5., 9-6. Add the explanation of set value of 4-steps
comparator mode.
9-9. Add the batch/discharge brand setting and all brand
accumulation clear.
10-11. Add the explanation of batch/discharge brand
setting target.
14-3. Add the explanation of operating mode.
15. Add the explanation of command and calibration by
communication.
16-3-12. Add the accumulation amount (10 digits),
effective brand number, setting brand number,
comparator brand setting target, all brand accumulation
clear, RS-232C operating mode external control input.
2016/05 DRW. NO. EN294-1492-G
Due to ECN FN16-02057
- Deletion-
Delete ‘Minebea Co., LTD. Measuring Components
Business Unit’ from the front cover.
2017/08 DRW. NO. EN294-1492-H
Due to ECN FN17-02017
・Delete the company name in the contents.
To Next Page
Loading...
