141
16-2-5. Width of P.C. (Print command)
The width of print command is selected by the setting of function F-33.
The width of print command is selected from [125 ms], [25 ms] and [5 ms].
Default is set to [25 ms].
The print command becomes unstable in the starting period because of converting the BCD data.
Please read correct BCD data according to the timing of the falling down of the print command.
16-2-6. BCD output times
The times of the BCD output is selected by the setting of function F-34.
The time of the BCD output is selected from [100 times/s], [20 times/s] and [4 times/s].
Default is set to [4 times/s].
To Next Page
Loading...
