II
For safe operation
Be sure to read this manual before operation.
1. Location of installation
Caution
Use the Instrument under the following conditions.
● Environmental temperature : －10 ℃ ~ 50 ℃ (Preservation : －20 ℃ ~ 60 ℃)
※The temperature span of JIS B 7611-2 conformity is －10 ℃ ~ 40 ℃.
● Environmental humidity : Less than 85 % R.H.（Non condensing）
Caution
Do not install the Instrument in following places. It may cause damage to the Instrument.
(1) Place to be avoided.
● Places exposed to direct sunlight and/or places in the high temperature.
● Places in a high humid area.
● Places where the instrument is directly affected by vibrations or mechanical shocks.
● Environments containing of corrosive gas or salt, etc.
● Environments with rapid change in temperature and/or humidity.
● Near the devices which generate magnetism or electromagnetic waves.
● Environments vulnerable to radioactivity or radioactivity rays.
● Environments where chemical reaction may take place such a laboratory.
To Next Page
Loading...
