24
4-4. Fine adjustment of zero and span
It is the function to make the fine adjustment of zero and span when there is a difference between
the actual measuring value and the weight.
4-4-1. Changeover to zero and span fine adjustment mode
Press the key, and move from a usual measurement
mode to the stand-by condition.
When key is pressed with key, is
displayed.
Press the key here.
is displayed, then key is pressed.
is displayed.
By pressing the key, is displayed, then it
enters into the fine adjustment mode of zero and span.
Measurement mode
＋
Move to the fine
adjustment mode of
zero and s
an.
Stand-by condition
Fine adjustment mode of
zero and span
To Next Page
Loading...
