51
Item Function No. Setting value Contents
Operation condition for
accumulating function
F-50 000 ~ 121
●000
Accumulation command operation.
10
0
digit: 0 = only in stale, 1 = Always
Automatic accumulating operation
10
1
digit: 0 = OFF,
1 = Synchronizing with finish,
2 = Automatic accumulation
at stable
Automatic accumulating condition
10
3
digit: 0 = Only in OK mode,
1 = No condition
Target of brand changeover F-51
●0
Changeover by function
1 Changeover by external control input
2 Changeover by communication
Brand number F-52
●0
Brand 0
1 Brand 1
2 Brand 2
3 Brand 3
4 Brand 4
5 Brand 5
6 Brand 6
7 Brand 7
Setting F key operation F-55
●0
OFF
1 Print Input
2 Hold Input
3 Batch start
4 Emergency stop
5 Zero clear
6 Tare clear
7 Accumulation clear
8 Measurement comparison
9 Forced batch finish
External control input INPUT1
operation setting
(Settings 1 to 8 operate all the
time,
settings 9 to 27 operate only in
measurement mode.)
F-60
●0
OFF
1
key operation
2
key operation
3
key operation
4
key operation
5
key operation
6
key operation
7
key operation
8
key operation
9 Zero clear
10 Tare clear
11 Flow start
12 Discharge start
13 Flow/Discharge changeover
ON: Discharge, OFF: Flow
14 Clear the last accumulated data
15 Accumulation clear
16 Error cancellation
17 Print command
18 Hold
●Has been set as default
To Next Page
Loading...
