Minelab GPX 4800 User Manual

15
Attaching the Bungy Cord:
1 Create a loop in the bungy cord.
2 Undo the plastic wingnut and remove the bolt from
the clamp.
3 Push the bolt back through the clamp and loop to
secure the bungy cord to the shaft.
4 Fasten the screw with the wingnut.
5 Clip the bungy cord onto one of the harness
shoulder strap rings.
For more detail see Adjusting the Detector for
Comfortable Detecting (p. 16).

Minelab GPX 4800 Specifications

General

Brand	Minelab
Model	GPX 4800
Category	Metal Detector
Language	English