Need help?Do you have a question about the Minelab GPX 6000 and is the answer not in the manual?
General| Technology | GeoSense-PI |
|---|---|
| Weight | 2.1 kg (4.6 lbs) |
| Battery Type | Rechargeable Lithium-ion |
| Battery Life | Up to 8 hours |
| Display | LCD |
| Warranty | 3 years |
| Operating Frequency | Multi-frequency |
| Ground Balance | Automatic and Manual |
| Manufacturer | Minelab |
| Coil Options | 11" Monoloop, 14" DD, 17" Monoloop |
| Audio Output | Built-in speaker |
| Headphones | Wireless headphones included |
| Water Resistance | Coil waterproof to 1 m (3 ft) |
Step-by-step guide to quickly set up the detector for initial use.
Identifies and describes the functions of each control button on the detector.
Explains the meaning of icons and readings shown on the detector's display screen.
Instructions for charging the rechargeable lithium-ion battery using AC or DC chargers.
Details on ML 100 headphones, features, wired operation, and pairing procedure.
Describes GPX 6000 coils (Mono, Double-D) and the process for changing them.
Guide to using the detector's automatic operation for optimal sensitivity and noise reduction.
Explanation of the two automatic sensitivity modes and their application in different conditions.
Procedure for manually setting sensitivity to maximise target detection and minimize noise.
Steps to perform Noise Cancel to reduce erratic audio responses caused by EMI.
Specific procedure for noise cancellation when using a Double-D coil in noisy ground.
Explains automatic tracking, Quick-Trak, and Ground Type settings for managing ground noise.
Steps to manually recalibrate the detector to new ground conditions using Quick-Trak.
Procedures for balancing normal and difficult/variable ground conditions.
Procedure for ground balancing in conductive (salty) ground conditions using a Double-D coil.
Explains how to identify the sources of detector noise like EMI and ground noise.
Details on identifying and managing noise caused by conductive (salty) soils.
Guide to selecting between EMI Cancel and Conductive Ground Cancel modes for Double-D coils.
Instructions on how to toggle the optional Threshold Tone on or off.
Solutions for common errors, coil errors, system errors, and coil overload issues.
Addresses common problems like no sound, pairing issues, and slipping shafts.
Guidelines for operating and maintaining the detector safely and prolonging its lifespan.
To Next Page
