1. INTRODUCTION 3
2. BBS TECHNOLOGY 4
3. LIST OF PARTS 6
4. ACCESSORIES 6
5. ASSEMBLING THE DETECTOR 7
5.1. Lower Shaft Assembly 7
5.2. Armrest / Upper Shaft Assembly 7
5.3. Completing the Shaft Assembly 8
5.4. Shaft Mount the Control Box 8
5.5. Hipmounting/Chest Mount 9
6. BATTERIES 10
6.1. Installation of NiMH Battery Pack 10
6.2. Installation of Alkaline Batteries 10
6.3. Low Battery Warning and NiMH Recharging 11
6.4. Using your NiMH Chargers 11
table of contents
www.minelab.com
p1