Canada: window wiper system
Safety information
Warning
If the wipers start moving in the folded
away state, body parts can be jammed or
damage may occur to parts of the vehicle.
There is a risk of injury or risk of damage
to property. Make sure that the vehicle
is switched off when the wipers are in
the folded-away state and the wipers are
folded in when switching on.
NOTICE
The wiper blades can wear out or become
damaged prematurely when wiping on a
dry window for a longer period of time.
The wiper motor can overheat. There is a
risk of damage to property. Do not use the
wipers when the window is dry.
NOTICE
If the wipers are frozen to the windshield,
the wiper blades can be torn off and the
wiper motor can overheat when switching
on. There is a risk of damage to property.
Defrost the windshield prior to switching
the wipers on.
Turning on
Tap up the lever or press it past the resist-
ance point.
– Normal wiper speed: tap up once.
– Fast wiper speed: tap up twice or tap
once beyond the resistance point.
The lever automatically returns to its basic
setting when released.
Turning off and flick wipe
Press the lever down.
– To switch off from fast wiper speed:
press down twice.
– To switch off from normal wiper speed:
press down once.
– Flick wipe: press down once.
The lever automatically returns to its basic
setting when released.
Intermittent operation or rain
sensor
Principle
The rain sensor automatically controls the
wiper operation depending on the intensity
of the rainfall.
General information
The sensor is located on the windshield, di-
rectly in front of the interior mirror. With-
out the rain sensor, the interval of the wiper
operation is predefined.
Seite 110
CONTROLS Driving
110
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
