cally returns to the center position when
released.
Engaging selector lever position P
Press button P.
Rolling or pushing the vehicle
General information
In some situations, the vehicle is supposed
to roll without its own power for a short
distance, for instance in a car wash or to be
pushed.
Engaging selector lever position N
NOTICE
Selector lever position P is automatically
engaged when the ignition is switched off.
There is a risk of damage to property. Do
not switch ignition off in car washes.
1. Start the engine while pressing on the
brake pedal.
2. If necessary, release the parking brake.
3. Depress the brake pedal.
4. Touch the selector lever lock and en-
gage selector lever position N.
5. Switch the engine off.
In this way, the ignition remains
switched on, and a Check Control mes-
sage is displayed.
The vehicle can roll.
Irrespective of the ignition, the selector
lever position P is automatically engaged
after approx. 15 minutes.
If there is a malfunction, you may not be
able to change the selector lever position.
Electronically unlock the transmission lock,
if needed, refer to page 119.
Kickdown
Kickdown is used to achieve maximum driv-
ing performance. Press down accelerator
pedal beyond the resistance point.
Sport program M/S
Principle
The shifting points and shifting times in
the Sport program are designed for sport-
ier handling. The transmission, for instance
shifts up later and the shifting times are
shorter.
Seite 117
Driving CONTROLS
117
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
