MINICAM SoloPro - Manual Conventions

Rev G - 07/2013
Page: 6
WARNING
Warning denotes a hazard. It calls attention to a procedure which, if not correctly
performed or adhered to, could result in injury or loss of life. Do not proceed
beyond a warning note until the indicated conditions are fully understood and met.
CAUTION
Caution denotes a hazard. It calls attention to a procedure that, if not correctly
performed or adhered to, would result in damage to or destruction of the
instrument. Do not proceed beyond a caution sign until the indicated conditions are
fully understood and met.
General Safety Considerations.
WARNING!
No operator serviceable parts inside. Refer servicing to qualified personnel. To
prevent damage, do not remove any covers.
If this instrument is not used as specified, the protection provided by the equipment
may be impaired. This instrument must be used in a normal condition (in which all
means for protection are intact) only.
CE
The CE mark is a registered trademark of the European Community. (If
accompanied by a year, it is when the design was proven.)
Manual Conventions
Keyboard Key
This represents a ke
y
ph
y
sicall
y
located on the instrument
keyboard of the instrument.
‘Softkey’
This indicates a “softke
y
," a ke
y
whose label is determined
by the firmware of the instrument.
Screen Text This indicates text displa
y
ed on the instruments screen.