4
WARNING: All of the parts, hardware and components such as
the hanger bracket and hanger ball have been provided for your
safety and the proper installation of your new ceiling fan. The use
of other parts, hardware or components not supplied by Minka
Aire
®
with the fan will void the Minka Aire
®
Warranty.
REMEMBER to turn off the power. Follow the steps below to hang
your fan properly:
Step 1. Attach the mounting bracket to the outlet box with two
screws and washers provided with the outlet box. Make sure the
bracket is tight and secured (Fig. 4).
Step 2. Lift fan into position by hanging the motor assembly onto the
hook from the ceiling mounting bracket allowing it to hang freely
(Fig. 5).
HANGING THE FAN
Fig. 4 Fig. 5
OUTLET BOX
MOUNTING
BRACKET
MOTOR
To Next Page