Minnich A-1C - Page 12

Dowel Drill Manual
12
SAFETY DECAL LOCATION
All safety labels on Minnich Manufacturing
units have been carefully placed so they can
be easily seen at all times. There are several
different types of labels on the units. Always
keep these warnings free of dirt, concrete,
or anything else that restricts visibility. Never
remove the labels for any reason. If the label
on your machine become worn or in any way
difcult to read, call our parts department for
replacements.
A
B
C
D
E
F
G
I
HIGH PRESSURE
BLEED AIR PRESSURE
BEFORE SERVICING
DRILLS WILL
AUTOMATICALLY START
WHEN AIR SUPPLY IS LOST
AND REAPPLIED
12287-64
WARNING
DRILLS WILL
AUTOMATICALLY START
WHEN AIR SUPPLY IS LOST
AND REAPPLIED
12287-64
WARNING
WARNING
NOISE MAY
DAMAGE HEARING
WEAR PROPER HEARING
PROTECTION
FLYING PARTICLES MAY CAUSE
EYE INJURIES
WEAR PROPER EYE
PROTECTION
HIGH PRESSURE
KEEP AWAY FROM LEAKS
BLEED DOWN BEFORE REMOVING
LINES TO SERVICE
DUST CAN CAUSE INJURY TO
YOUR HEALTH
IF VENTILATION IS INADEQUATE
USE AN APPROVED RESPIRATOR
1228 7- 3
WARNING
BE SURE SUPPLY LINES ARE SECURE
DO NOT EXCEED 120 PSI (8.25 BARS)
OR DAMAGE TO MACHINE AND OR
BODILY HARM M AY RESULT
12287-1
12287-42 12287-38
1
12287-36 12287-36
12287-37
12287-43
READ & UNDERSTAND OWNERS MANUAL COMPLETELY.
TIGHTEN ALL LOOSE BOLTS INSPECT ALL LINES, PIPES, AND HOSES FOR DAMAGE.
REPAIR AS NECESSARY.
DRILL STEEL MUST NOT BE BINDING IN GUIDE BEARING. MAKE SURE DRILL STEEL
IS STRAIGHT, FREE OF OBSTRUCTIONS, AND NOT BINDING IN ANYWAY.
FILL THE OILER-PER MANUAL.
WARNING
KEEP GUARDS IN PLACE
DISCONNECT POWER
BEFORE SERVICING
12287-12
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
DRILL HAMMERS WILL NOT
FUNCTION WHEN INDICATOR IS RED
WHEN INDICATORS IS RED FILL OIL RESERVOIR
WITH PROPER ROCK DRILL LUBRICANT
GREEN INDICATES LUBRICATOR RESERVOIR IS FULL
Bio-Rock Drill Oil 15W50
TM
Minnich Mfg. Recommended Rock Drill Oil
WARNING
STAND CLEAR
WHEN RAISING OR LOWERING
12287-10
WARNING
STAND CLEAR
WHEN RAISING OR LOWERING
12287-10
Pick Point
J
K
H
WARNING
NOISE MAY
DAMAGE HEARING
WEAR PROPER HEARING
PROTECTION
FLYING PARTICLES MAY CAUSE
EYE INJURIES
WEAR PROPER EYE
PROTECTION
HIGH PRESSURE
KEEP AWAY FROM LEAKS
BLEED DOWN BEFORE REMOVING
LINES TO SERVICE
DUST CAN CAUSE INJURY TO
YOUR HEALTH
IF VENTILATION IS INADEQUATE
USE AN APPROVED RESPIRATOR
12287- 3
DRILLS WILL
AUTOMATICALLY START
WHEN AIR SUPPLY IS LOST
AND REAPPLIED
12287-64
WARNING
WARNING
BE SURE SUPPLY LINES ARE SECURE
DO NOT EXCEED 120 PSI (8.25 BARS)
OR DAMAGE TO MACHINE AND OR
BODILY HARM MAY RESULT
12287-1
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
INSTALL LOCK
PIN PRIOR TO
TRANSPORTING MACHINE
12287-7
WARNING
KEEP GUARDS IN PLACE
DISCONNECT POWER
BEFORE SERVICING
12287-12
WARNING
KEEP GUARDS IN PLACE
DISCONNECT POWER
BEFORE SERVICING
12287-12
12287-62 12287-62
12287-62 12287-62
X
X X
X
DRILLS
FEED
1 2 ON ON
OFF
OFF
IN
IN
OUT OUT
TM
WARNING
STAND CLEAR
WHEN RAISING OR LOWERING
12287-10
12287-43
READ & UNDERSTAND OWNERS MANUAL COMPLETELY.
TIGHTEN ALL LOOSE BOLTS INSPECT ALL LINES, PIPES, AND HOSES FOR DAMAGE.
REPAIR AS NECESSARY.
DRILL STEEL MUST NOT BE BINDING IN GUIDE BEARING. MAKE SURE DRILL STEEL
IS STRAIGHT, FREE OF OBSTRUCTIONS, AND NOT BINDING IN ANYWAY.
FILL THE OILER-PER MANUAL.
WARNING
STAND CLEAR
WHEN RAISING OR LOWERING
12287-10
Bio-Rock Drill Oil 15W50
TM
Minnich Mfg. Recommended Rock Drill Oil
A-2-BW
A-2-BW
L
N
M