Dowel Drill Manual
4
GENERAL SAFETY
SYMBOL SAFETY HAZARD
Respiratory Hazard
Explosive fuel hazards
Burn hazard
Factory Settings
SAFETY SYMBOLS
Potential hazards associated with the operation
of this equipment will be referenced with hazards
symbols which may appear throughout this manu-
al in conjunction with safety messages.
Indicates a hazardous situation which, if not
avoided, COULD result in DEATH or SERI-
OUS INJURY
Indicates a hazardous situation which, if not
avoided, COULD result in MINOR or MOD-
ERATE INJURY
Indicates a hazardous situation which, if not
avoided, WILL result in DEATH or SERIOUS
INJURY
Addresses practices not related to personal
injury
SAFETY MESSAGES
The four safety messages shown below will
inform you about potential hazards that could
injure you or others. The safety messages specif-
ically address the level of exposure to the opera-
tor and are preceded by one of four words:
DANGER, WARNING, CAUTION or NOTICE.
Do not operate or service the equipment before
reading the entire manual. Safety precautions
should be followed at all times when operating this
equipment. Failure to read and understand the safe-
ty messages and operating instructions could result
in injury to yourself and others.
This operation manual has been developed to pro-
vide complete instruction for the safe and efcient
operation. Refer to the engine manufactures instruc-
tions for data relative to its safe operation. Before
using, ensure that the operating individual
has read and understood all instructions in the
manual. The surrounding environment and you,
could be damaged if you do not follow instructions.
DO NOT USE TOOL IF IT IS IN NEED OF SERVICE!
To Next Page
Loading...
