60 minutes
E37
3. Press the zoom selection button to select the desired
setting time to auto power off. Available options will be
changing as following:
• Channel 1 [CH1] auto power off
• Channel 2 [CH2] auto power off in wireless flash mode
4. Press the flash on/off button in
order to return to the original
mode that you can take pho-
tos.
• The selected settings are maintained even when the flash unit is
switched off, or the battery is removed.
TIME TO AUTO POWER OFF
options
lamps
[ M.ZOOM ]
4 minutes 15 minutes
[ 24mm ] [ 35mm ]
options
lamps
60 minutes
[ M.ZOOM ]
none
[ 24mm ]
none
[ 85mm ]
E36
It is possible to change the settings of the time to auto power off.
1. Press the flash on/off button
for 3 seconds until three lamps
glow at the same time; auto
lamp, flash-on lamp, off lamp.
• This shows that now you are in the
mode for changing the settings.
2. Press the wireless/remote
flash button to select the
items. On this flash, the follow-
ing two items are available.
• Channel 1 [CH1]
the auto power off setting is provided.
• Channel 2 [CH2]
the auto power off setting in wireless
flash is provided.
TIME TO AUTO POWER OFF
To Next Page
Loading...
