Minolta DIMAGE SCAN DUAL - Inserting the Film Holder into the Scanner

The white mark
should be upright.
INSERTING THE FILM HOLDER INTO THE SCANNER
Dimâge Scan Dual 25
The notches in the film and slide holders identify the position of the scanning windows. Push
the holder in all the way in to scan the last frame on that side of the film holder. Remove, flip,
then reinsert the film holder to scan the frames on the other side of the holder.
Remove, flip, then reinsert the negative holder to
scan frames 4, 5, or 6.
• Frames 3 or 4 with the slide holder.
• The blue mark should be upright
Insert the negative holder into the scanner’s film
slot to scan frames 1, 2, or 3.
• Frames 1 or 2 with the slide holder.