Minolta DIMAGE SCAN DUAL - Image Correction - Tone Curve

Dimâge Scan Dual 49
1. Click on , then click on the tone in the
control image that should be scanned as
the brightest neutral white in your image.
• The cursor changes to .
• The RGB brightness values of the selected tone will be
changed to 255.
2. Click on , then click on the tone in the
control image that should be scanned as
the darkest neutral black in your image.
• The cursor changes to .
• The RGB brightness values of the selected tone will be
changed to 0.
Setting the White and Black Points
Properly setting an images white and black points will usually correct the colour cast and
midtone distribution.
• Changes are automatically applied to the preview image.
Continued on the following page.
IMAGE CORRECTION – CURVES