Minolta DS-100 - Names of Parts

E9
Set Up
E8
Names of Parts
• The Data Saver DS-100 uses only 3.3v SmartMedia. You can not use 5.5v
SmartMedia.
• 64Mb or larger SmartMedia can not be used with the DS-100.
Electrical contact area
Index label area
Write-protect area
Access lamp
The 4MB 3.3V SmartMedia card provided with the Data Saver DS-100 has already been
properly formatted for use with the DS-100. See page 14 to format cards not included with
this unit.
Data-full lamp
Rear cap
Card slot door
Mounting index
Card window
Write (Record)
Button
Format button