EasyManuals Logo

Minolta DYNAX 404SI MAXXUM STSI User Manual

Minolta DYNAX 404SI MAXXUM STSI
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
7978
CARE AND STORAGE
Questions and Service
If you have questions about your camera, contact your local
camera dealer or write to the Minolta distributor in your area.
Before shipping your camera for repair, please contact an
authorized Minolta Service Facility for details.
Cleaning
If the camera or lens barrel is dirty, wipe it gently with a soft,
clean, dry cloth.
If the camera or lens comes in contact with sand, gently blow
away loose particles - wiping may scratch the surface.
To clean the lens surface, first brush away any dust or sand then,
if necessary, moisten a lens tissue with lens cleaning fluid and
gently wipe the lens in a circular motion, starting from the center.
Never place lens fluid directly on the lens.
Never touch the interior of the camera, especially the shutter and
mirror, doing so may impair their alignment and movement.
Dust on the mirror will not affect the exposure but may affect the
focus, Use a blower brush to remove dust from or around the
mirror.
Never use compressed air to clean the camera’s interior, it may
cause damage to sensitive interior parts.
Never use organic solvents to clean the camera.
Never touch the lens surface with your fingers.
Before Important Events
Check the camera’s operation carefully, or take test photographs.
Minolta is not responsible for any loss that may occur due to an
equipment malfunction.
CARE AND STORAGE
Operating Temperature and Conditions
This camera is designed for use from -20 to 50 °C (4 to 122 °F).
Never leave your camera where it may be subjected to extreme
temperatures such as the glove compartment of a car.
Data panel response time will be slow at colder temperatures.
The display will temporarily darken at higher temperatures, but
will restore when the temperature normalizes.
Never subject the camera to extreme humidity.
To prevent condensation from forming, place the camera in a
sealed plastic bag when bringing it from cold environment to a
warm environment. Allow it to come to room temperature before
removing it from the bag.
The low-battery symbol may appear even with fresh batteries
depending on the storage conditions. To restore camera power,
repeat turning the camera on and off.
Battery capacity decreases at colder temperatures. Keep your
camera and spare batteries in a warm inside pocket when
shooting in cold weather. Batteries will regain some of their
capacity when warmed to normal operating temperature.
Storage
When storing your camera for extended periods,
Always attach the protective caps.
Store in a cool, dry, and well-ventilated area away from dust and
chemicals such as moth balls. For long periods, place the camera
in an airtight container with a silica gel drying agent.
Periodically release the camera’s shutter to keep it operating
properly.
Before using after prolonged storage, check the camera’s
operation to make sure it is functioning properly.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Minolta DYNAX 404SI MAXXUM STSI and is the answer not in the manual?

Minolta DYNAX 404SI MAXXUM STSI Specifications

General IconGeneral
Film Format35mm
FocusAutofocus
Lens MountMinolta A mount
FlashBuilt-in
Exposure ControlManual
Power Source2x CR2
Camera TypeSLR
ISO Range25 - 5000

Related product manuals