1 – Selectable focus area
Press the AF button and turn the control dial to
specify the desired local focus area.
1110
Cust 9 — AF Button
2 – Spot Focus
Press the AF button to focus using the center focus
sensor.
Cust 10 — AE-Lock Button
1 – Press to activate, release to cancel.
2 – Press once to activate, press again to
cancel.
•Turning the built-in flash on or off cancels AE lock.
• AEL appears in the viewfinder when AE-lock button is active (down).
•Slow sync is selected when the built-in flash is up or an attached accessory flash is on.
•Manual shift is selected when the exposure mode is set to manual.
Cust 8 — Frame Counter
1 – Frame counter in data panel counts up.
2 – Frame counter in data panel counts down.
•The frame counter counts up when non-DX coded film is loaded.
Cust 6 — Focus Hold Button (Lens)
1 – Focus Hold
Pressing the focus-hold button on the lens locks
the focus.
2 – Spot Focus
Pressing the focus-hold button on the lens
selects the center focus sensor.
The mounted lens must have a focus hold button.
3 – Continuous Focus
Select this setting when focusing on moving
subjects.
Pressing the focus-hold button on the lens
selects continuous focus.
Cust 7 — Eyepiece Sensor
1 – Grip sensor activated
Eyepiece sensor is activated when the grip sensor is tripped.
2 – Main switch activated
Eyepiece sensor is activated when the main switch is in the ON position. Use this
setting when the grip sensor is not being tripped (user wearing gloves).
•Slide the main switch to LOCK when the camera is not being used.
CUSTOM FUNCTIONS
English
To Next Page
Loading...
Need help?
General
