EasyManua.ls Logo

Minolta Maxxum Dynax 7 - Display Brightness and Contrast; Display Illumination; Display Contrast

Minolta Maxxum Dynax 7
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4544
Your camera features complete
focus control, utilizing a newly
developed 9-point autofocus sys-
tem with center dual cross-hair
sensors to give great flexibility
when composing photographs,
and the ability to switch between
AF and MF using the AF/MF con-
trol button without changing hold-
ing positions.
Display Illumination
Display Contrast
If desired, the display can be illuminated.
Press the navigation display illu-
minator.
The display illuminator shuts off
approximately 5 seconds after the last
camera operation.
If the button is pressed again before
the 5 seconds, it will shut off.
The contrast level of the display is adjustable.
The contrast set display
appears.
Turning the dial in the +
direction increases the
intensity.
The contrast display will disappear when the shutter-release but-
ton is pressed partway down.
1. Press the display selection but-
ton for 3 seconds to select the
contrast set display.
2. Turn either the front or rear-
control dial to adjust the con-
trast intensity.
The location of the film
plane is indicated by
the arrow.
DISPLAY BRIGHTNESS AND CONTRAST
FOCUSING
FOCUSING

Related product manuals