EasyManua.ls Logo

Minolta Maxxum Dynax 7 - Focus Area (Continued); How to Lock the Local;Spot Focus Area; AF Illuminator

Minolta Maxxum Dynax 7
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5958
FOCUS AREA
In low-light/low subject contrast situa-
tions, the AF illuminator automatically
projects a pattern of lines onto the
subject for the camera’s AF sensors
to focus on.
Do not to obstruct the AF illuminator.
AF illuminator works for the center focus area only.
The range of the AF illuminator is 0.7 – 7.0 meters (2.3 – 23.0 ft.).
The AF illuminator will not fire in continuous autofocus mode.
The AF illuminator may not operate with 300mm or longer single
focal length lenses.
The AF illuminator will not operate with 3x-1x Macro Zoom.
When an accessory flash is attached, its AF illuminator may be active
in place of the camera’s AF illuminator.
AF illuminator can be canceled by Custom 21-2 (p. 176).
How to Lock the Local/Spot Focus Area
1. Turn the wide/local focus area
switch to local, and select the
focus area you want to lock.
2. Turn the wide/local focus-area
switch to lock.
After taking the picture, the focus area remains locked.
When the wide/local focus-area switch is locked, pressing the focus-
area selector or the spot-AF button doesn’t activate the focus.
AF ILLUMINATOR
How to Lock the Wide Focus Area
1. Turn the wide/local focus area
switch to wide.
2. Turn the wide/local focus-area
switch to lock.
FOCUSING

Related product manuals