EasyManua.ls Logo

Minolta Maxxum Dynax 7 - Focus Area (Continued); Local Focus Area

Minolta Maxxum Dynax 7
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5756
FOCUS AREA
Viewfinder shows which sensor is
being used for focusing.
While pressing the spot-AF button or
the focus-area selector, the focus is
locked.
3. While pressing either the focus-area selector or the spot-
AF button, press the shutter-release button and take the
picture.
After taking the picture, as long as the spot-AF button or the focus-
area selector remains pressed, focus remains locked, and additional
pictures may be taken.
If you release your finger from the focus-area selector or the spot-AF
button, locked focus (position) is canceled, but local focus area
remains.
If 14-segment honeycomb-pattern is selected, the exposure is locked
when the focus is locked.
The same local focus area can be used to adjust focus (see p. 58).
Only the center spot-focus area can be used with the AF Reflex
500mm f/8 lens and AF Power zoom 35-80mm, f/4-5.6.
Local Focus Area
Any one of the 9 local focus areas can be
selected.
1. Set the wide/local focus-area
switch to local.
The local focus-area
appears in the navigation
display.
2. Press the focus-area selector
to select the local focus area
you want. Press the spot-AF
button to use the center spot-
focus area.
FOCUSING

Related product manuals