7978
EXPOSURE COMPENSATION
Changing to 1/3 Increments
1. Set the exposure-compensation
dial to the edge of the 1/2EV
increment (ie; +/-3.0EV).
2. While pressing the exposure-
compensation dial lock-release
button, turn the exposure-com-
pensation dial to the edge of the
1/3EV increment (ie; +/- 2.0EV).
1/3EV increment 1/2EV increment
Example below shows changing from 1/2EV to 1/3EV increment.
• When going from 1/3EV increment to 1/2EV increment, use the same
procedure as described in steps 1 and 2 above.
• If you select 1/3EV increment, aperture, shutter speed, and the value
on the meter index will change to 1/3EV increment.
• If 1/3EV increments are selected, the lens’ maximum/minimum aper-
ture may not appear correctly, but the camera will be set correctly.
Exposure compensation
value of -1.5
(1/2EV increment)
Exposure compensation
value of +1.3
(1/3EV increment)
• If you press the display-selection button, the
meter-index display appears in the navigation
display. Exposure compensation index is shown
in the upper mid-area with .
Meter Index
The meter index displays the exposure compensation value you set.
METERING
To Next Page
Loading...
