17
Inserting an SD/SDHC/SDXC Memory Card
Expand your camera’s storage by
using SD, SDHC or SDXC memory
cards.
1. Unlock and open the Battery/
memory card compartment at the
bottom of the camera.
2. Insert the SD/SDHC/SDXC card
into the memory card slot with the
metallic part facing the back side
of the camera.
3. Push the SD/SDHC/SDXC card
into the memory slot until it clicks
into place.
4. Close and lock the Battery/
memory card compartment.
To remove the SD/SDHC/SDXC card
1. Unlock and open the battery/
memory card compartment.
2. Gently push the card until it
pops out.
3. Pull out the card carefully.
• Windows 2000/XP does not support SDXC card (exFAT format). But
in Windows XP (Service Pack 2 or 3), you can download exFAT
patch update to support SDXC card.
• To use the SDXC card with Mac OS, the OS version should be 10.5
or higher.
• The memory card that is not inserted correctly may cause damage
to the camera. Please be careful when inserting the memory card.
• To prevent children from swallowing the memory card, please keep
the memory card out of reach of children.
To Next Page
Loading...
